PLY 3D models
Scanned using Artec 3D technology
Fairing• Leo • HD
Using the new, AI-powered HD Mode, all the thin edges, including the internal reinforcements, as well as the holes of various diameters, and the long, sweeping curves of the aerodynamic exterior were easily captured.
Crankcase• Leo • HD
All the thin edges and angled surfaces of the crankcase, together with its individual structural reinforcements, were captured with unmistakable fidelity.
Giraffe skull• Eva • HD
When it comes to digitizing such fragile historical artifacts as bones, skeletons, and skulls of rare creatures, be it a dinosaur, a mammoth, or ancient human remains, 3D data quality is key.
Tripod• Eva • HD
Fine lines and sharp edges have always been tricky to scan but with the new HD Mode, those difficult areas are hardly the challenge they used to be.
Garuda and Vishnu• Eva • HD
As you can see, the figurine has a very rich and fine geometry from top to bottom – perfect for testing the capabilities of HD Mode.
Compound bow• Eva • HD
Looking at this compound bow 3D model, you can tell that the object it replicates was named compound for a reason.
Motorcycle cylinder head HD• Eva • HD
Effectively 3D scanning such a diminutive 6" × 6" × 4"(15 cm × 15 cm × 10 cm) powerhouse, with its diverse and sundry assemblage of parts, is a formidable challenge for a quality inspection or reverse engineering workflow.
Lobster HD• Eva • HD
Every stretch of salty exoskeleton, legs, and antennae has been lovingly captured in high-resolution color 3D and reborn in the digital realm.
Motorcycle engine cover HD• Leo • HD
Have a good look around this model and have a look at the lines, the details, the form, and the fact that the 3D model represents the original object with astounding accuracy.
Metal table HD• Eva • HD
Have a look at each angle of this 3D model and notice how well everything has been captured — from its finest details to its texture, its ornamental design, and its altogether exquisite appearance.
Ornate wooden doors HD• Eva • HD
These elaborately-crafted wooden doors were scanned with an Eva in merely a handful of minutes. Since the resulting 3D model was destined for use in a movie, the doors’ many intricate carvings needed to pass close visual inspection.
Motorcycle frame HD• Leo • HD
Just a few minutes of scanning was enough to capture a significant portion of the frame’s geometry for a vivid example of what HD Mode is all about.
Industrial compressor HD• Eva • HD
Whether intended for reverse engineering or quality inspection, this impressive 3D printable model of compressor would easily fit the bill.
Wooden chair HD• Leo • HD
The chair’s crisp edges along its cross rails, legs, and stiles, together with its precise interfaces among components, called for a high degree of precision.
Bearded guy HD• Leo • HD
The comb-over & fade along with the boxed beard were faithfully recreated in myriads of submillimeter-accurate polygons and packed into a 3D model file in .stl format.
Human skeleton HD• Eva • HD
What makes this model special is the ultra-high level of detail and the incredible cleanliness of data that the scanner is able to achieve, all thanks to HD Mode.
Radiator grille HD• Leo • HD
With noise levels at an absolute minimum, holes become that much easier to scan, as can be seen here.
Dual-clutch gearbox HD• Eva • HD
Full of smaller, finer details as well as holes, fine lines, sharp edges, and smooth, possibly shiny surfaces, the dual-clutch gearbox becomes a lot easier to scan with Artec 3D’s new HD mode.
Hubcap HD• Eva • HD
Hollow areas or surfaces inside the rim that were previously quite tricky to capture in one go have been reconstructed in full detail with no artifacts or noise.
Motorcycle wheel HD• Eva • HD
Scanned with Artec Eva, two common scanning challenges were overcome: Black surfaces, and shiny objects.
Motorcycle engine HD• Leo • HD
Boosted by the AI-injected feature of Artec Studio 15 called HD Mode, the scanner managed to capture all the teeny details of the engine in high resolution with no help from scanning spray or markers.
What appears to be a normal, everyday office chair, plucked from the glass and steel confines of a typical high-tech office in sunny California, serves as a fine example of capturing modern furniture with Artec Leo.
This 3D scanning project embodies a confluence of factors that could have complicated effective capture and reconstruction of the wild variety of shapes that needed to be captured and reconstructed in this case.
Shampoo bottle cap• Micro
The cap was made of semi-transparent plastic and required a bit of dusting with an airbrush. Then it was mounted on the scanner’s rotating platform with a clamp. A couple of mouse clicks — and scanning commenced.
