Micro 3D models

An exhaust gas recirculation (EGR) metal connection pipe, scanned with Artec Micro II in just 15 minutes. The scanner captured every curve, thread cut, round holes, and even the tiniest digits and letters of the serial number – with exceptional accuracy.

A detailed industrial part scanned with Artec Micro II in 10 minutes, rendering every rib, edge, depression, hole, and the complete relief, including tiny lettering and numbers etched onto the surface, all with micron-level accuracy.

A small beetle scanned in meticulous detail with Artec Micro serves as an example of what photo texturing can do for your 3D model (hint: brilliant color and texture quality).

This model of a tiny screw was captured with Artec Micro in just 6 minutes.

Covered in tiny knobs, pockmarked dots on the hollowed-out, hard-to-reach insides, and we’re not even talking about the tiny dimensions. This jaguar ring is a challenging obstacle course for any 3D scanner, and served as a good test to demonstrate Artec Micro’s capabilities.

Scanning such an extremely small, extremely thin object is impossible for many scanners. But with one click, in just ten minutes, Artec Micro was able to deliver impressive accuracy and high quality.

This beautiful copper heart-shaped pendant was scanned with the fully automatic desktop scanner Artec Micro in just 5 minutes.

It took only two scans of five minutes each to render the crystalline shape of the object, captured here in precious detail and high resolution.

For a significant scanning challenge, it was time to get up close, for a highly-detailed model of this industrial clamp.

This diminutive skull's 55mm length, 26mm height, and 34mm width, together with its ample degree of geometric complexity, made it a fine choice for scanning with Micro.

The cap was made of semi-transparent plastic and required a bit of dusting with an airbrush. Then it was mounted on the scanner’s rotating platform with a clamp. A couple of mouse clicks — and scanning commenced.

Easily captured with the desktop high-resolution 3D scanner Artec Micro, this tiny plastic wand connector section of a Drain Weasel would be a challenge for many other 3D scanners.

Plastic can reflect light directed at it. That’s simple yet very useful info for someone who wants to have an electrical outlet 3D scanned.

Small object — big challenge. How do you capture the thread of this 10 mm long screw using a 3D scanner?

A copper key scanned with Artec Micro. The key had to be sprayed due to its reflective surface.

Despite its complex geometry and reflective surface, this 1.5 cm plastic bolt was captured using the ultra-precise Artec Micro in just three scans.

A metal nut, just over 15 mm, easily scanned with Artec Micro in just two scans. Unlike handheld scanners, Micro was able to scan this piece without the need for any additional features or background.

A pipe bend, scanned with Artec Micro. It took only two scans using the simple trajectory to get the full shape of the pipe.

This object is considered as «large» for trajectory purposes. Although we used only a «simple» type of trajectory, with fewer frames, all of the intricate curvatures were successfully captured.