Eva 3D models

To scan a person, you need a scanner that is lightning quick and perfectly accurate, or a model who can freeze at will. Artec Eva captured these three stunning, full-color 3D models in, we kid you not, four-minute scans.

When it comes to digitizing such fragile historical artifacts as bones, skeletons, and skulls of rare creatures, be it a dinosaur, a mammoth, or ancient human remains, 3D data quality is key.

Fine lines and sharp edges have always been tricky to scan but with the new HD Mode, those difficult areas are hardly the challenge they used to be.

As you can see, the figurine has a very rich and fine geometry from top to bottom – perfect for testing the capabilities of HD Mode.

Looking at this compound bow 3D model, you can tell that the object it replicates was named compound for a reason.

Effectively 3D scanning such a diminutive 6" × 6" × 4"(15 cm × 15 cm × 10 cm) powerhouse, with its diverse and sundry assemblage of parts, is a formidable challenge for a quality inspection or reverse engineering workflow.

Every stretch of salty exoskeleton, legs, and antennae has been lovingly captured in high-resolution color 3D and reborn in the digital realm.

Have a look at each angle of this 3D model and notice how well everything has been captured — from its finest details to its texture, its ornamental design, and its altogether exquisite appearance.

These elaborately-crafted wooden doors were scanned with an Eva in merely a handful of minutes. Since the resulting 3D model was destined for use in a movie, the doors’ many intricate carvings needed to pass close visual inspection.

Whether intended for reverse engineering or quality inspection, this impressive 3D printable model of compressor would easily fit the bill.

What makes this model special is the ultra-high level of detail and the incredible cleanliness of data that the scanner is able to achieve, all thanks to HD Mode.

Full of smaller, finer details as well as holes, fine lines, sharp edges, and smooth, possibly shiny surfaces, the dual-clutch gearbox becomes a lot easier to scan with Artec 3D’s new HD mode.

Hollow areas or surfaces inside the rim that were previously quite tricky to capture in one go have been reconstructed in full detail with no artifacts or noise.

Scanned with Artec Eva, two common scanning challenges were overcome: Black surfaces, and shiny objects.

The craftsman who created this feast for the eyes definitely put a great deal of effort into their work. So did Artec Space Spider and Eva, the two handheld 3D scanners which were used to capture everything down to the finest features of this geometry-rich object in order to make the 3D model look as impressive as the original work of art, inspired by Doom, the epic shooter.

They say that Nature is the perfect designer, and if you could ask Mr. Stubbs about this, he’d probably agree with you.

Eva was used to scan the entire stone, resulting in a superb digital replica, while Space Spider scanned the runes themselves, for a deeper view of the engraving marks and the surrounding stone, after which all scans were combined into one final model.

A bronze statue of a fairytale boy taming a giant dragonfly, made by famous sculptor Katib Mamedov. Dragonfly wings were a challenge since there was little surface on them, and no background to make it easier.

This motorcycle was scanned with both Eva and Space Spider. Eva allowed for fast and easy acquisition of the overall shape, while Space Spider was used to scan the intricate geometry of the wheels and the sides.

A small bedside table, quickly scanned by Artec Eva in three scans. The thin legs might have been a challenge if they had not been scanned in front of a background (the wall and floor). Otherwise, a very easy to scan piece of furniture.

This mahogany tissue box holder proved to be an excellent scanning object due to its unique geometry.

An elegant upholstered chair. A fairly complicated object to scan — the polished black wood and the thin back and arms required a special approach.

Capturing both hair and fur can be quite tricky, but this 3D model of a very furry werewolf, made with Eva, shows that nothing is impossible!

To create this high-quality 3D model, both the interior and exterior of this bright orange pumpkin were scanned using Eva and Space Spider.