Blender 3D models
Scanned using Artec 3D technology
Cube• Space Spider
A watertight 3D-model of a plastic cube produced by ProtoLabs.
Flower• Space Spider
Scanning this flower with Artec Space Spider was fairly easy — one just needed to be mindful of perspective change in geometry of the petals once the object was turned over.
Makita case• Space Spider
This section of plastic casing for an electric screwdriver is a very interesting object from a 3D scanning point of view.
Stone corner piece• Eva Lite
An architectural piece, scanned with Eva Lite.There's plenty of clearly visible ornaments that makes tracking simple and reliable.
Head sculpture• Eva Lite
This head is a perfect example of a suitable object for Eva Lite - there are no color shifts that Eva with the color camera could have used for tracking enhancement.
Hydrant• Eva
This is a 3D model of a working hydrant on a street in Palo Alto, CA. To scan it, we used an Artec Eva connected to an Artec battery and a tablet for full scanning mobility.
Measuring tape• Space Spider
This measuring tape was scanned as a potential demo object.
Panasonic GH4• Space Spider
We scanned our Panasonic GH4 with our Artec Space Spider. This was an untreated scan, so we scanned the camera as-is with no prep.
Ball joint• Space Spider
A very simple part to scan and a good example of scanning holes.
Power drill• Space Spider
Well used Ridgid power drill scanned with the Artec Spider.
Dragon Chalice• Space Spider
A novelty chalice, made of plastic, with metal cup inside.
Lu Yu• Space Spider
A statue of the Chinese Sage of Tea scanned with Artec Space Spider.
Product part• Space Spider
Product part made of plastic. Scanning time was around 5 minutes, and post-processing took about 20 minutes. This is a good example of fast reverse engineering.
Bat-eared fox skull• Space Spider
This small and fragile skull of a bat-eared fox was scanned with Artec Space Spider. While the model looks complicated, there were no challenging areas to scan.
Foot mold• Space Spider
This metal mold of a child's foot was scanned with Spider in less than one minute.
Full body scan• Eva
We used a tablet and the Artec battery pack so the scanning was really fast. It took only 4 minutes.
Golden column• Eva
An architectural element, scanned with Eva in under 2 minutes. After scanning it was slightly adjusted in 3D modeling software and carved in styrofoam.
Gear• Space Spider
A good example of a symmetrical object, which is impossible for other scanners to capture without the application of stickers.
Engine• Combo
The body of the engine and the larger details were scanned with Artec Eva. Spider was used to capture the more intricate geometry.
Tower well valve• Eva
An early 1900’s tower well valve scanned on-site with Artec Eva, connected to a portable battery and a tablet.
